Lee-Dan IR-203 apartment station

The IR-203 is Lee-Dan's 3-wire apartment station. It is the one fitted when an old bell-and-buzzer system was upgraded to voice without running new wire.

  • 3-wire apartment station
  • Talk, Listen and Door buttons
  • Stocked for whole-building swaps
Lee-Dan apartment intercom station with Talk, Listen and Door buttons

What the IR-203 is

The IR-203 is the unit on the apartment wall: a speaker, and three push buttons marked Talk, Listen and Door. When a visitor presses your button at the entrance, it sounds a tone. You hold Talk to speak, Listen to hear the reply, and press Door to let them in.

It connects with 3 wires: two shared by every apartment on the system, and one that is yours alone and carries your call signal.

That short wire count is the point of the IR-203. Buildings that had only a bell and a door buzzer already had enough wire in the walls for a three-wire intercom, so they could gain a voice system without opening the walls.

How to tell which model you have

The IR-203, IR-204 and IR-205 look the same from the front. The difference is the number of wires behind them. The model number is printed on the unit, usually on the back or inside. If you can't find it, we identify it by taking the station off the wall and counting the connected wires.

ModelWiresSharedYour own
IR-203321
IR-204431
IR-205541

What goes wrong

  • No tone when a visitor calls. The speaker has failed, or your own call wire is broken or loose.
  • You can hear but can't be heard, or the reverse. The Talk or Listen button contacts are worn.
  • The Door button does nothing. The button contact has failed, or the fault is at the door. Ask a neighbour to try theirs.
  • It stopped after painting or renovation. A wire was pulled off its terminal, or the station was put back on the wrong wires.

Repair or replace the station?

A station with a failed speaker or worn buttons is replaced, not repaired. The part is inexpensive and the swap is quick. What matters is fitting the right model: a station with the wrong wire count will not work and can disable the line for other apartments.

The current version is the IR-203E, which is also sold as a direct replacement for the matching TekTone station.

What it costs

Replacing one apartment station usually falls at the low end of our $200 to $400 repair range. For several stations in one visit, contact us for a price.

Common questions

Can we swap an IR-203 for a different Lee-Dan model?

Only if the building's wiring supports it. The three models use different numbers of wires, so they are not interchangeable on the same line.

Is the IR-203 still made?

Yes. The current version is the IR-203E, sold by Lee-Dan and its distributors.

Can our super fit one?

The wires must go back on the same terminals they came off. If they are mixed up, that station won't work and others on the line may stop too. If building staff do it, photograph the wiring before disconnecting anything.

Ours work, but the plastic has yellowed and cracked. Can they be replaced?

Yes. A new station on the same wires takes a few minutes per apartment.

4.7 stars from 23 Google reviews

“Great service, quick response, very professional with reasonable prices. It took me a while to find a company that doesn't request a lot of information just to provide an estimate and an appointment.”
Google review
“Jacob Intercom helped us modernize our building with a wireless intercom. Residents appreciate the convenience, and we appreciate the increased security.”
Google review
“They arrived on time and explained every step of the installation. Their technician completed the job exactly as promised.”
Google review

Call us now for a free quote

Tell us about your building and what's going on, or just call. Our technicians are available for a free consultation.

718-252-2730

jacobintercom@gmail.com

Call 718-252-2730Free quote