Apartment building intercom systems

A building intercom has to work for every resident, every day, for years. Here is how to choose one, keep it running, and replace it when the time comes.

  • 35 years in New York buildings
  • Repair and installation
  • Existing wiring reused where possible
Row of Manhattan walk-up buildings with an intercom at the entrance

What a building system has to do

  • Let a visitor call any apartment from the front door.
  • Let the resident talk to them, and see them on video systems.
  • Let the resident open the door without going downstairs.
  • Lock the door again behind the visitor.

Everything else, from phone answering to delivery codes, is added on top. The first four must work every time.

Choosing a system by building size

BuildingWhat usually fits
Up to 12 apartmentsButton panel, audio or two-wire video, on the existing wire
12 to 40 apartmentsButton or directory panel, wired video or a phone-based system
Over 40 apartmentsDirectory panel with a scrolling list or keypad, phone-based or IP system, access control at every door
More than one entranceA panel at each, all calling the same apartments

The parts, and where they are

  • Entry panel at the front door or in the vestibule.
  • Amplifier or controller and power supply, usually in the basement, a meter room or a closet near the entrance.
  • Riser cable running up through the building, one per vertical line of apartments.
  • Apartment stations or monitors on each apartment wall.
  • Electric strike or magnetic lock on the entrance door.

Knowing where your controller is saves time on every repair. If nobody knows, we label it on the first visit.

Keeping it running

Most building-wide failures start at the power supply or the entry panel, and most give warning: fading volume, crackle in wet weather, buttons that need a second press. A yearly inspection catches these early. See maintenance contracts.

When it fails

Start with intercom repair by symptom. The first question is always how many apartments are affected.

Replacing it

Most buildings can reuse the riser cable already in the walls. That keeps a replacement to a short visit per apartment. See replacement and upgrades.

Common questions

Who is responsible for a building intercom?

The building owner, through the super or managing agent. Residents should report faults to them in writing.

Can a building have different systems for different entrances?

It is possible but harder to maintain. We recommend one system with a panel at each door.

How long does a building intercom last?

Wired systems commonly run for decades with parts replaced along the way. Network systems are usually replaced sooner, when software support ends.

4.7 stars from 23 Google reviews

“Great service, quick response, very professional with reasonable prices. It took me a while to find a company that doesn't request a lot of information just to provide an estimate and an appointment.”
Google review
“Jacob Intercom helped us modernize our building with a wireless intercom. Residents appreciate the convenience, and we appreciate the increased security.”
Google review
“They arrived on time and explained every step of the installation. Their technician completed the job exactly as promised.”
Google review

Call us now for a free quote

Tell us about your building and what's going on, or just call. Our technicians are available for a free consultation.

718-252-2730

jacobintercom@gmail.com

Call 718-252-2730Free quote